Hardware Setup - Infinite Peripherals DPP-350 User Manual

Infinite peripherals dpp-350 thermal printer user manual

Hide thumbs Also See for DPP-350:

Table of Contents

HARDWARE SETUP

Memory Switch Settings

Step 1.

Switch OFF the printer.

Step 2.

Press and hold ON/OFF button. The STATUSLED flashes GREEN

and after about 6 sec holding the ON/OFF button STATUS LED

flashes RED and then turns RED.

Step 3.

Release the ON/OFF button and wait for the printer to print out

the current memory settings and instruction..

Note: Care must be taken when changing factory preset configuration

information.

The pressing LF (YES) – confirms changes.

The pressing ON/OFF (No) – cancels changes.

USER MANUAL

Table of Contents

Do you have a question about the DPP-350 and is the answer not in the manual?