Table of Contents
Advertisement
Use
NOTE: Should the range finder fail to display a measurement, ensure that the range finder window
on the front of the camera is clean and free of water drops.
The laser range finder may not operate in all environments and may return erroneous readings
in some extreme situations. Thick smoke, steam, water and dirt on the range finder lens may
interfere with the laser and prevent accurate readings. Do not use the laser range finder for crit-
ical measurements.
See section "Configuring Options" on page 35 for instructions and information on enabling and
disabling the range finder and selecting the distance units (meters or feet).
3.8
Video Transmitter (optional)
The video transmitter operates in the 2.4 GHz license free ISM band and offers two fully independ-
ent channels.
In order to use the video transmitter, it may be necessary, depending on local regulations,
to make a license application for the operation of this system to the local Regulating Au-
thority for Telecommunications and Post which may cost a regular/annual fee (outside the
USA).
The video transmitter indicator is illuminated when the video transmitter is operating. Video trans-
mitter enable and disable as well as channel select are selectable via the on-screen setup or the
MSA FireService Utility application. See section "Configuring Options" on page 35 for instructions
and details regarding the on-screen setup options for the video transmitter.
The radio and its antenna are required to be mounted and kept at least 8 inches (20 cm) away
from any part of the user's torso or head and must not be co-located or operated in conjunction
with any other antenna or transmitter.
26
WARNING
WARNING
EVOLUTION 6000 Thermal Imaging Camera
MSA
US
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Evolution 6000 and is the answer not in the manual?
Questions and answers