Safety Regulations; Correct Use; Restrictions - MSA Evolution 6000 Operating Manual

MSA
MSA AUER
1

Safety Regulations

1.1

Correct Use

This manual includes detailed operating instructions for the complete EVOLUTION 6000 Thermal
Imaging Camera (TIC) Series, including the EVOLUTION 6000 TIC, EVOLUTION 6000+ TIC and
EVOLUTION 6000X TIC, hereafter referred to as camera. Each camera is designed to assist fire-
fighters to see where visibility is impaired by smoke and darkness.
The cameras were designed to withstand the firefighting conditions of heat, flame, driving water
spray, and frequent impact normally seen by a firefighter. Extension beyond these demands may
damage the camera and render it inoperable. It is not recommended to use the camera for ex-
tended periods in high-heat conditions.
The thermal imaging camera is not a substitute for standard techniques and precautionary meas-
ures. The user must ensure that the standard operational processes continue to be observed and
maintained even when using the thermal imaging camera.
The thermal imaging camera can be used for the following purposes:
Initial size-up/Scene assessment
-
Locating the source of the fire
-
Determining the extent of the fire
-
Determining entry and ventilation points
-
Detection of flashover dangers
-
Search and rescue operations
-
Hazmat situations
-
Overhaul
-
Preplanning/Fire code inspections
-
Supporting police work
-
Response vehicle navigation (darkness or heavy smoke)
-
1.2

Restrictions

The thermal imaging camera is not suitable for the following applications:
Although the camera is waterproof, it is unable to take underwater images.
-
Likewise, the camera does not image through glass, water or shiny surfaces which may act
-
like a mirror.
The camera does not improve the user's sight. Corrective lenses must continue to be worn.
-
It is imperative that this operating manual be read and observed when using the product. In par-
ticular, the safety instructions, as well as the information for the use and operation of the product,
must be carefully read and observed. Furthermore, the national regulations applicable in the us-
er's country must be taken into account for a safe use.
Alternative use, or use outside this specification will be considered as non-compliance. This also
applies especially to unauthorised alterations to the product and to commissioning work that has
not been carried out by MSA or authorised persons.
The warranties made by Mine Safety Appliances Company with respect to the product are voided
if the product is not used and serviced in accordance with the instructions in this manual. Please
US EVOLUTION 6000 Thermal Imaging Camera
Safety Regulations
5