Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for MSA Evolution 6000
Summary of Contents for MSA Evolution 6000
- Page 1 Operating Manual EVOLUTION 6000 Thermal Imaging Camera Order No.: 10129292/02...
- Page 2 © MINE SAFETY APPLIANCES COMPANY 2013 - All Rights Reserved This manual is available on the Internet at: www.msasafety.com Manufactured by MSA NORTH AMERICA 1000 Cranberry Woods Drive, Cranberry Township, PA 16066...
-
Page 3: Table Of Contents
Color Palette Select (Plus Feature) ................. 23 Color Palette Indicator (Plus Feature) ................23 Compass (Plus Feature) ....................23 Range Finder (optional in the EVOLUTION 6000+ and EVOLUTION 6000X) (Plus Feature) ........................25 Video Transmitter (optional) .................... 26 ... - Page 4 Truck Mounted Charger ....................31 Multi-Use Charger ......................32 3.12 Battery Care ........................33 Camera Setup ........................... 34 On-Screen Camera Setup (EVOLUTION 6000+ TIC and 6000X TIC Only) ....34 Accessing On-screen Configuration Menu ..............34 Options ..........................35 Selecting Options ......................35 Configuring Options ......................
-
Page 5: Safety Regulations
This manual includes detailed operating instructions for the complete EVOLUTION 6000 Thermal Imaging Camera (TIC) Series, including the EVOLUTION 6000 TIC, EVOLUTION 6000+ TIC and EVOLUTION 6000X TIC, hereafter referred to as camera. Each camera is designed to assist fire- fighters to see where visibility is impaired by smoke and darkness. - Page 6 During regular working hours, call 1-877-MSA-FIRE in the US. This camera contains batteries and electronics. Dispose of or recycle in accordance with all ap- plicable federal state and local regulations.
-
Page 7: Safety And Precautionary Measures
Use of unapproved batteries may render the system inoperative. (10) Use only battery chargers made available by MSA for use with this device; other chargers may damage the battery pack and the device. Dispose of batteries in accordance with local health and safety regulations. -
Page 8: Product Warranty
Electromagnetic radiation (radio transmissions) may cause interference. Minimize nearby radio transmissions if excessive interference occurs. To avoid lens fogging, the user may coat the lens and display window with MSA anti-fog material (MSA P/N 13016). Do not point the thermal imaging camera directly at the sun; otherwise, damage to the de- tector may occur. -
Page 9: Extended Service
It is expressly agreed that the original end-user's sole and exclusive remedy for breach of the above warranty, for any tortious conduct of MSA, or for any other cause of action, shall be the re- pair and/or replacement, at MSA's option, of any equipment or parts thereof, that after examina- tion by MSA are proven to be defective. -
Page 10: Product Registration And Extended Warranties For Msa Tics
Safety Regulations Product Registration and Extended Warranties for MSA TICs Thank you for purchasing an MSA Thermal Imaging Camera. Registering your products with MSA will improve the processing of any warranty claims and enable you to receive information regard- ing product updates and new products. Please register your camera online or purchase an ex- tended warranty at www.MSASafety.com/register. -
Page 11: Description
Overview and Brief Description of the Thermal Imaging Camera Fig. 1 The EVOLUTION 6000 camera All EVOLUTION 6000 Series Thermal Imaging Cameras are: equipped with a 320 x 240 uncooled microbolometer heat sensor which provides clear, high resolution images equipped with a large screen, high definition display... - Page 12 2.4 GHz (or 2.1 GHz, depending on local legislation), two channel video transmission system Able to be configured on the camera or through a desktop PC using MSA's FireService Utility software Our most advanced camera, the EVOLUTION 6000X TIC, offers all of the above and also in-...
-
Page 13: Use
Switching OFF Keep ON/OFF button pressed for approx. 3 seconds until all LED indicators switch off. Release the ON/OFF button as soon as all LED indicators switch off. The camera is switched OFF. EVOLUTION 6000 Thermal Imaging Camera... -
Page 14: Securing The Camera During Use
The EVOLUTION 6000 camera always operates in the NFPA 1801 defined "Basic Mode". The EVOLUTION 6000+ and EVOLUTION 6000X TICs, however, provide "Plus Mode" features. See chapter 3.6 for information on accessing the Plus Mode. -
Page 15: User Interface And Operation (All Models)
User Interface and Operation (All Models) The following features and functions are common to all camera models. Additional User interface and Operating instructions for the EVOLUTION 6000+ TIC can be found in chapter 3.5. and, for the EVOLUTION 6000X TIC, in chapter 3.9. - Page 16 See chapter 7 for the Digital Temperature Indicator accuracy. Temperature Indicator Bar The Temperature Indicator Bar works with the Digital Temperature Indicator to graphically repre- sent the approximate temperature of an object in the green box in the center of the display. EVOLUTION 6000 Thermal Imaging Camera...
- Page 17 1047 °F (564 °C) and 1090 °F (588 °C) Turn orange, starting with light shades changing to darker shades over 1090 °F (588 °C) Turn red, starting with light shades changing to darker shades EVOLUTION 6000 Thermal Imaging Camera...
-
Page 18: Battery Status Indicator
Most electronic devices cease to operate at certain high temperature extremes. Tests on the EVOLUTION 6000 series of TICs indicate that they provide an acceptable image when subject- ed to an ambient temperature of approximately 120°C (248°F) for about twenty minutes. Expo- sure to conditions exceeding these may result in deterioration and loss of image. -
Page 19: Trigger Button
Restrict the laser beam to the area where it is to be used, for example by screening with non- reflective surfaces When not in use, store the laser equipment so that it cannot be accessed by unauthorised persons EVOLUTION 6000 Thermal Imaging Camera... - Page 20 Turns OFF the laser pointer The trigger button also activates the distance meter/range finder (section “Range Finder (op- tional in the EVOLUTION 6000+ and EVOLUTION 6000X) (Plus Feature)” page 25) if the camera is so equipped. EVOLUTION 6000 Thermal Imaging Camera...
-
Page 21: Evolution 6000+ Tic User Interface And Operation
MSA AUER EVOLUTION 6000+ TIC User Interface and Operation The following features and functions are common to the EVOLUTION 6000+ TIC and EVOLUTION 6000X TIC models. Additional User interface and Operating instructions for the EVOLUTION 6000X TIC can be found in chapter 3.9. -
Page 22: Accessing The Nfpa Plus Features
Fig. 8 Additional EVOLUTION 6000+ TIC and 6000 X TIC on-screen indicators Plus Mode indicator Color Palette indicator (Plus Feature) Zoom Level indicator (Plus Feature) Range Finder Compass (Plus Feature) Accessing the NFPA Plus Features Thermal imaging cameras compliant with NFPA 1801, Standard for Thermal Imaging Cameras in the Fire Service, require a deliberate action to access all camera features beyond those described as NFPA Basic functions. -
Page 23: Accessing The Plus Features
Push and hold the ZOOM button for two seconds to skip immediately back to 1X zoom. Color Palette Select (Plus Feature) The camera enters the Plus mode with standard white-hot imagery. The EVOLUTION 6000+ TIC and EVOLUTION 6000X TIC feature up to five user-selectable display palettes to enhance image- ry in a variety of operational environments. - Page 24 See chapter 4.3 for information on enabling and disabling the compass, selecting either a text or an icon indicator, compass calibration, and entering a local declination angle for true north read- ings. EVOLUTION 6000 Thermal Imaging Camera...
-
Page 25: Range Finder (Optional In The Evolution 6000+ And Evolution 6000X) (Plus Feature)
When not in use, store the laser equipment so that it cannot be accessed by unauthorised persons NOTE: if installed, this feature is accessed only when the EVOLUTION 6000+ TIC or EVOLUTION 6000X TIC is in the NFPA Plus mode. -
Page 26: Video Transmitter (Optional)
MSA FireService Utility application. See section “Configuring Options“ on page 35 for instructions and details regarding the on-screen setup options for the video transmitter. -
Page 27: Evolution 6000X User Interface And Operation
MSA AUER EVOLUTION 6000X User Interface and Operation In addition to the features, functions and options found in the EVOLUTION 6000 and EVOLUTION 6000+ models, the EVOLUTION 6000X camera features image and video capture capability. On-Screen Indicators Fig. 10 On-screen indicators... -
Page 28: Trigger Operation With Flashlight And Laser Pointer Option Installed
Images are saved in a JPG format. A minimum of 1000 images can be stored. Once the image memory is full, new images overwrite the oldest images. Video files are stored in the "Video" folder and the still images are stored in the "Pictures" folder in the camera. EVOLUTION 6000 Thermal Imaging Camera... -
Page 29: Downloading Files From The Evolution 6000X Tic To A Pc
As with any external storage device, be sure to safely remove/eject hardware before unplugging the USB cable. Failure to do so may result in lost or corrupted files. The USB hardware is called "File-backed Storage Gadget". EVOLUTION 6000 Thermal Imaging Camera... -
Page 30: 3.10 Battery Installation
The EVOLUTION 6000 series cameras run on a single lithium Ion battery pack. Replacement batteries must have the same power and layout as those delivered by MSA with the camera. Unsuitable batteries can lead to a system failure. -
Page 31: 3.11 Battery Charging
Do not charge the batteries in a hazardous location or an explosive atmosphere. Truck Mounted Charger The MSA EVOLUTION 6000 Series Truck Mounted Charger provides for simultaneous charging of the battery in the camera and a spare battery. Charge status indication for the battery in the camera displays on the camera's front panel. See the Charging Indicator section of the manual (chapter 3.4 for details). -
Page 32: Multi-Use Charger
The MSA Multi-Use Charger may be used to simultaneously charge up to two spare Evolution 6000 TIC batteries. This charger is supplied with a 120/240 VAC universal power adapt- er and a 12 V automotive lighter/power outlet cable for mobile use. See Multi-Use Charger instruc- tions for complete details. -
Page 33: 3.12 Battery Care
Batteries which do not pass the test must be replaced. NOTE: It is recommended to recharge batteries every six months if they have not been in use or if they have not been kept continuously in a charger. EVOLUTION 6000 Thermal Imaging Camera... -
Page 34: Camera Setup
Also, many advanced options are available with the MSA Fire Service utility package. The Fire Service utility package is required to access the options on the EVOLUTION 6000 TIC (which does not have an on-screen menu). Refer to the operating instructions that come with the Fire Service utility package for information on available options and how to use the package. -
Page 35: Options
PALETTE button SELECT button (selects the option) NOTE: Options not installed on the camera do not display. NOTE: Options locked by the MSA FireService Utility will appear grayed out and cannot be se- lected. Configuring Options For all options, the current selection displays... - Page 36 ON and OFF (if local Set Video Recorder ON or control has not been disa- Set Video Recorder OFF. bled via the MSA FireService Selection is confirmed and camera returns to the Config Utility package). main menu. EVOLUTION 6000 Thermal Imaging Camera...
-
Page 37: Msa Evolution 6000 Configuration Application
SELECT EXIT to return to normal operation. MSA EVOLUTION 6000 Configuration Application The MSA EVOLUTION 6000 Configuration Application is available for the Windows operating sys- tem and enables the user to completely configure the camera. All configuration options found in the On-Screen Configuration menu are available as well as many more that allow complete ac- cess to all configurable camera settings. - Page 38 Locate the USB port B under the battery door and connect the USB cable ( Fig. 11, page 29). Turn ON the EVOLUTION 6000 TIC. NOTE: The EVOLUTION 6000 TIC must NOT be in the OnScreen Setup mode when using the MSA EVOLUTION 6000 Configuration Application.
-
Page 39: Maintenance
The product should be regularly checked and serviced by trained personnel. A record must be kept of the periodic inspection and maintenance. Always use original parts from MSA. Repairs and maintenance must be carried out only by authorized MSA service centers. -
Page 40: Germanium Lens Replacement
Should water or other contam- inants enter the camera housing, the camera must be returned to an authorized MSA repair fa- cility. Do not operate the camera with a damaged germanium lens. -
Page 41: Service
MSA AUER Service If your camera requires service or repair: Contact the MSA Service Center at 1-877- MSA-FIRE. Describe the problem to the Repre- sentative as completely as possible. Verify with your Representative that the product should be returned to MSA. -
Page 42: Technical Data
> 6 minutes Room Temp (20 - 23 °C) -40°C (-40°F) >25 minutes Room Temp (20 - 23 °C) -30 C (-22°F) >40 minutes Storage temperature -40°C to +70°C (-40 °F to 158 °F). range EVOLUTION 6000 Thermal Imaging Camera... -
Page 43: Technical Data Transmitter
EN 301 489 Teil 1 & 3 (2000-08), EN 300 440-2V1.1.1 Teil 1 & 3 (2001-09), BAPT 222 ZV 105 & 106, BAP 122 R1, EMC, EN 61000-6-3 and EN 61000-6-2 / FCC Part 90 (for 2.4 GHz) EVOLUTION 6000 Thermal Imaging Camera... -
Page 44: Ordering Information
10040222 Vehicle Mounted Charger Fuses 10145746-SP Wrist Strap 10039516 Shoulder Strap 10039515 Retractable Lanyard 10040226 Carabiner 10040005 Carrying Case 10127441-SP Tripod Mount 10145748 Label Kit (Reflective ID) 10145749 Fire Station Kit 10145750 Vehicle Kit 10145771 EVOLUTION 6000 Thermal Imaging Camera... - Page 45 Ordering Information MSA AUER EVOLUTION 6000 Thermal Imaging Camera...
- Page 46 MSA - The Safety Company www.MSAsafety.com MSA North America Canada Mexico MSA Corporate Center MSA Canada MSA deMexico, S A De C V 1000 Cranberry Woods Drive 16435 118th Avenue Fraccionamiento Industrial Avenida Cranberry Township, PA 16066 Edmonton AB T5V 1H2 Del Conde #6...