Use; Safety Instructions; Switching On And Off; Switching On In Normal Mode, Function Test - MSA Evolution 6000 Operating Manual

MSA
MSA AUER
3

Use

3.1

Safety Instructions

Check the batteries before and during use
Check whether the batteries are fully charged before using. If not fully charged, the nominal oper-
ating time cannot be achieved. Also check the battery level during use.
For details on chargingchapter 3.11.
3.2

Switching ON and OFF

Switching ON in normal mode, function test

Fig. 2 ON/OFF button
(1) Press green ON/OFF button for approx. 1 second.
 Within 5 seconds, the TIC carries out a self-test of the sensor electronics.
Status LEDs under display illuminate according to battery status ( section Battery Sta-

tus Indicator page 18).
The current software version briefly displays.

An image appears after a few seconds on the display.

(2) Check camera function:
 Direct the camera toward an object or person until the thermal image shows on the dis-
play.
The camera is now ready for use.


Switching OFF

(1) Keep ON/OFF button pressed for approx. 3 seconds until all LED indicators switch off.
(2) Release the ON/OFF button as soon as all LED indicators switch off.
The camera is switched OFF.

US EVOLUTION 6000 Thermal Imaging Camera
Use
13