Baxi TS Super Installation And Servicing Instructions page 17

Captive Nut
Door Shield
Fig. 34
Controls Access Door
Fig. 36
Location Pip
Fig. 37
Fig. 35
Extension Piece
Location Hole
8.0 Checking for Spillage
8.4 Completion
1. Take the black painted extension piece,
captive nut and screw from the fire contents kit.
2. Fit the captive nut to the rear edge of the door
shield, over the hole (Fig. 34).
3. Slide the extension piece between the door
shield and the casting, ensuring the location hole
locates over the pip on the door shield (Fig. 36).
4. Secure the extension piece to the door shield
using the black screw (Fig. 37).
5. Replace the controls access door (Fig. 35).
6. These instructions and the users instructions
should be handed to the customer. At the same
time the customer should be shown how to
operate the fire and boiler safely and efficiently.
7. The need for annual servicing should be
emphasised and the returning of the guarantee
card advised.
17