Fender
Controls Access Door
Fender
Controls Access
Door
FS, BB, CB & BC model
Fig. 30
Fender Assembly
Fig. 31
7.0 Arranging the Coals
7.1
Arranging the Coals (cont)
Finial
7. At this point it is necessary to fit the fender
assembly.
8. Remove the fender from its packing (Fig. 30)
(on FS, BB, CB, BC models screw the finials to
the fender assembly).
9. Remove the controls access door from the
fender assembly (Fig. 30).
10. Hook the fender into the sides of the
combustion box (Fig. 31).
11. The appliance must now be checked for
spillage.
15