Macro Programming - TIPTEL 290 ISDN Operating Instructions Manual

Macro programming

Macro programming
Via the macro programming, you have the option to assign function or telephone numbers to the
14 speed dialling stations of your telephone. This allows you to execute frequently used settings
or functions during a call. Some of the speed dialling stations are already pre-assigned and label-
led accordingly.
The last speed dialling station is already pre-assigned and labelled "macro". By pressing this but-
ton, you skip steps 1 to 3 of the following procedure and start with step 4.
Press the  or  button to select
1.
"settings".
Press the  button.
2.
Press the  or  button to select
3.
"macro".
Press the  button.
4.
5. Press the desired speed dialling stati-
on.
Press the  or  button to select a
6.
macro function.
For telephone numbers only:
press the  button
-
- Enter the desired telephone number
via the numeric keypad.
Press the  button.
1.
Remark:
The following macro functions will either directly be executed by the telephone or the display will
show an entry request:
Target telephone number (dialling, pick-up ...), keypad (change to the keypad mode with entry
option), subaddressing (change to subaddress with entry option), three-party-conference, dis-
connecting a call, call transfer, call parking, call deflection (CD) and enquiry/switching between
lines, connection set-up (headset operation).
In contrast to this, the following macro functions directly lead to the relevant menu item and thus
shorten the browsing through the menu:
Call list, outgoing MSN (only needed if several MSNs are used, which is not recommended),
phone number display, contrast, appointments, time control, call forwarding, ringing tone, infor-
mation, direct dialling and macro.
Important:
It is not possible to further operate the telephone while entering menu settings via macro
buttons.
Every time you press the button, the display
switches between the available functions.
The display shows "macro".
The display shows "select key".
The display shows the corresponding speed
dialling station.
The display shows "enter telephone number"
The telephone number is shown in the dis-
play.
The function or telephone number is stored.
49