How To Install And Use Optional Lenses (Telephoto And Wide-Angle) - Fluke Ti32 User Manual

How to Install and Use Optional Lenses (Telephoto and Wide-Angle)

How to Install and Use Optional Lenses
(Telephoto and Wide-Angle)
Optional telephoto and wide-angle lenses are available for the Ti32 and TiR32
Thermal Imager. These lenses expand the flexibility and allow more
applications for your infrared inspection work.
To install and use an optional lens on the Imager:
1. With your Imager OFF, insert the SD memory card with firmware codes
for your optional lens into the SD memory card slot on the side of your
Imager.
2. Turn on the Imager by pressing a.
3. Follow directions displayed on the LCD to install the proper files onto the
Imager's internal memory.
4. After file installation, remove the SD memory card with the firmware files
and reinsert the standard SD memory card used for storing images.
5. Attach the optional lens onto the Imager by aligning the dot on the lens
with the dot on the Imager, see Figure 1.
6. Gently push optional lens into position and rotate clockwise until lens
locks into proper position.
It is important to select the proper lens option within your Imager's
Settings/Lens menu.
Note
Thermal Imagers
13