Focusing And Capturing An Image; Saving Imager Data - Fluke Ti32 User Manual

Ti32, TiR32
Users Manual

Focusing and Capturing an Image

Point the Imager at the object or area of interest, focus by turning the focus
control ring until the infrared image displayed on the LCD is as clear as
possible, and then press and release the trigger. The Imager displays the
captured image and a menu. The Ti32 and TiR32 menu allows image storage,
image setting adjustments, and recording of audio annotations for .is2 file
format. To cancel image storage and return to live viewing, press and release
the trigger.
Minimum focus distance for infrared camera (with the standard lens)
is 15 cm (approx. 6 inches). Minimum focus distance for visible
(visual) light camera is 46 cm (approx. 18 inches).
The Imager can save the image as a simple picture or as a
radiometric image that allows further temperature analysis. To
change the saved image format, see the "Setting File Format" section
later in this manual.
When IR-Fusion
the IR and visible light images on the LCD. When the IR image is
properly focused, the images should be almost perfectly aligned. This
functionality provides an easy method to get a good focus on the IR
image. Because of image parallax and minimum focus specifications,
the minimum distance for an aligned IR-Fusion
approximately 46 cm (18 inches).
Pressing the softkey labeled Settings, within the Image Captured section,
allows modification of image characteristics such as palette, picture-in-picture,
and range in .is2 format files only. Refer to the appropriate setting section for
operational details.

Saving Imager Data

The Imager saves displayed data on an SD memory card placed into the
camera. See the "Changing the SD Card" section for inserting and ejecting an
SD memory card. The file format set on the Imager determines how the
measured information is stored on the SD memory card. To store Imager data:
16
Note
Note
Note
®
is enabled, adjusting the IR focus control will align
®
image is