Dewpoint Alarm (Tir32); Smartview Software; Changing The Sd Memory Card - Fluke Ti32 User Manual

Dewpoint Alarm (TiR32)

1. Press a until Dewpoint appears over c.
2. Press softkey labeled Dewpoint.
3. Press the softkey labeled Enable to enable the dewpoint alarm function.
4. Press the softkey labeled Disable to disable the high-temperature alarm
function.
5. When enabled, press the sofkey labeled Up or Down to set the dewpoint
alarm.
6. Press Done when finished.
7. Wait for main menu to disappear or quickly squeeze and release the
trigger twice in order to return to live view.

SmartView Software

®
SmartView software is supplied with Fluke Imagers. It contains functions to
analyze images, organize data storage, and create professional reports.
®
SmartView allows audio annotations to be reviewed on a PC. SmartView
can be used to export IR and visible images as JPEG, BMP, GIF, TIFF, and
PNG files.

Changing the SD Memory Card

To eject an SD memory card from the Imager, press in on the exposed edge of
the SD memory card and then release. The card should pop partially out after
releasing it. Carefully pull the card out of the slot.
The SD memory card can be inserted and removed while the Imager
is in operation.
Do not remove the SD memory card while storing an
image. Image data may be lost.
To insert an SD memory card into the Imager, carefully slip the card into the
slot with the card's label facing toward the LCD as shown in Figure 3. Push
the card in until it catches.
Note
W Caution
Thermal Imagers
SmartView Software
®
27