Changing The Temperature Units; Setting File Format - Fluke Ti32 User Manual

Ti32, TiR32
Users Manual
7. Press the softkey labeled Next to move to the next time element.
8. Press softkey labeled Done when finished.
9. Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice in order to return to live view.
The 12 hour format has a selection for setting whether the time is AM or
PM.

Changing the Temperature Units

The Imager will display temperature in Fahrenheit or Celsius. To change the
temperature units:
1. Press a until the F3 softkey label reads Settings.
2. Press the softkey labeled Settings.
3. Within the Settings Menu, press a, labeled Menu, until the F3 softkey
reads Units.
4. Press a until Units is displayed over d.
5. Press the softkey labeled Units.
6. Press c for Celsius or d for Fahrenheit.
7. Press the softkey labeled Done to set the units.
8. Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice in order to return to live view.

Setting File Format

Data stored on the Imager's SD memory card can be saved in three different
file formats: .bmp, .jpeg, and .is2. This setting is saved and remains valid when
the Imager is turned off and back on. It can always be changed to another
format prior to capturing images.
To change the file format:
1. Press a until the F3 softkey label reads Settings.
2. Press the softkey labeled Settings.
3. Within the Settings Menu, press a, labeled Menu, until the F1 softkey
reads File Format.
4. Press a until File Format appears over softkey F3.
10