Setting The Backlight - Fluke Ti32 User Manual

5. Press the softkey labeled File Format.
6. Press the softkey labeled Up (c) or Down (d) to select either bitmap
(.bmp) file format, jpeg (.jpeg/.jpg) format, or (.is2) file format according
to your needs.
7. Press softkey labeled Done when finished.
8. Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice in order to return to live view.
The bitmap and jpeg formats only save the image shown on the Imager's
display. The ".is2" format is a file format that saves all radiometric data,
infrared image, IR-Fusion
image, screen settings, and voice recording annotated to the stored image.
Bitmap (.bmp) or JPEG (.jpeg/.jpg) images can be transferred to a PC and used
immediately in many types of software and electronic documents. Images in
".is2" format can be transferred to a PC for further analysis and report
generation through Fluke SmartView
available from specially approved software vendors. SmartView
.is2 images as JPEG, BMP, GIF, TIFF, and PNG files. Visit the Fluke web site
or contact Fluke to find out about currently available software options.

Setting the Backlight

The backlight can be set to Auto-sensing or Full-Bright. To set the backlight:
1. Press a until the F3 softkey label reads Settings.
2. Press the softkey labeled Settings.
3. Within the Settings Menu, press a, labeled Menu, until the F1 softkey
reads Backlight.
4. Press the softkey labeled Backlight.
5. Press the softkey labeled Auto or Full-Bright.
6. Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice in order to return to live view.
To extend battery life, Auto-Sensing automatically adjusts backlight
brightness based on ambient light levels.
®
mode information, palette information, full visual
®
software or non-Fluke software that is
Note
Thermal Imagers
Using the Menu
®
converts the
11