Introduction - Fluke Ti32 User Manual

Introduction

The Fluke Ti32 and TiR32 Thermal Imagers (hereafter "the Imager") are
handheld thermal imagers used for preventive and predictive maintenance,
equipment troubleshooting, repair verification, building inspections,
restoration and remediation work, energy audits, and weatherization purposes.
The Ti32 is optimized for industrial and commercial equipment maintenance,
and the TiR32 is optimized for building envelope inspections and building
diagnostics. Both Imagers have high-performance 320 X 240 focal-plane array
(FPA) sensors and produce thermal and visual images on a 640 X 480 display.
The temperature measurement range starts at -20 °C, and goes up to +600 °C
for the Ti32, and starts at -20 °C and goes up to +150 °C for the TiR32. The
thermal image can be displayed using any one of a number of standard color
palettes or Ultra Contrast™ color palettes.
®
Both Imagers have IR-Fusion technology, only available from Fluke, where a
full visual image (640 X 480) can be displayed, blended, and stored with each
IR image. Thermal and visual images can be presented simultaneously as a full
thermal image or as a Picture-In-Picture (PIP) image in various blend modes.
Thermal and visual images are displayed on the Imager LCD and can be saved
to a removable SD memory card. Transferring images to a PC is accomplished
by removing the SD memory card and connecting it to a PC through the
®
included, multi-format USB card reader. SmartView software is included for
image analysis and report generation from these saved images.
Imager power is supplied by one of two included, field-swappable,
rechargeable Lithium-ion smart battery packs, with 4+ hours of continuous
operation each.
In addition to the features mentioned above, the Ti32 and TiR32 provide voice
recording capabilities for annotating saved images, emissivity correction,
reflected background temperature compensation, transmission correction, and
many other useful, easy-to-use features.
1