Torch; Backlight - Fluke Ti105 User Manual

Torch

The torch illuminates darker work areas. When set, pull the secondary trigger
to operate.
When the torch is on and an image is captured, the torch momentarily
shines brighter and functions as a visible camera flash.
To set:
1. Push .
2. Push / to highlight Camera.
3. Push  or  to view the menu.
4. Push / to highlight Laser/Torch.
5. Push  or  to view the menu.
6. Push / to highlight an option.
7. Push  to set the option.
8. Push:
 to set the change and go back to the live view.
 or  to set the change and go back to the previous menu.
 to cancel the change and go back to the live view.

Backlight

The backlight level control is set to low, medium, and high. To set the
backlight:
1. Push .
2. Push / to highlight Camera.
3. Push  or  to view the menu.
4. Push / to highlight Backlight.
5. Push  or  to view the menu.
6. Push / to highlight an option.
7. Push:
 to set the change and go back to the live view.
 or  to set the change and go back to the previous menu.
 to cancel the change and go back to the live view.
Note
Thermal Imagers
Menus
37