Table of Contents
Advertisement
B I O S s e t u p a n d m e n u s
Video Configuration Submenu
Feature
Palette Snooping
DMI Event Logging Submenu
Feature
Event log capacity
Event log validity
View DMI event
log
Clear all DMI
event logs
Event Logging
ECC Event
Logging
Prompt on POST
errors
Mark DMI events
as read
Security Menu
Feature
User Password Is
Supervisor Password Is
Set User Password
Set Supervisor Password
Clear User Password
User Setup Access
Unattended Start
6/10
FT1200 HANDBOOK
Options
Disabled (default)
Enabled
Options
No options
No options
No options
No (default)
Yes
Disabled
Enabled (default)
Disabled (default)
Enabled
Disabled
Enabled (default)
No options
Options
No options
No options
Password can be up to seven
alphanumeric characters.
Password can be up to seven
alphanumeric characters.
No options
Disabled
Enabled (default)
Disabled (default)
Enabled
Description
Controls the ability of a primary PCI graphics
controller to share a common palette with an ISA
add-in video card.
Description
Indicates if there is space available in the event log.
Indicates if the contents of the event log are valid.
Enables viewing of DMI event log.
Clears the DMI Event Log after rebooting.
Enables logging of DMI events.
Enables logging of ECC events.
If enabled, the BIOS prompts for input, if an error
occurs during power up.
Marks all DMI events as read.
Description
Reports if there is a user password set.
Reports if there is a supervisor password set.
Specifies the user password.
Specifies the supervisor password.
Pressing <Enter> clears the user password.
Enables or disables user access to the Setup
program.
Enables the unattended start feature. When
enabled, the computer boots, but the keyboard
is locked. The user must enter a password to
unlock the computer or boot from a floppy
diskette.
Advertisement
Table of Contents
