Power Menu; Boot Menu - Mitsubishi Electric Apricot FT1200 Technical Manual

Power Menu

Feature
Power Management
Inactivity Timer
Hard Drive
VESA Video Power Down Disabled

Boot Menu

Feature
QuickBoot Mode
Restore on AC/Power
Loss
On Modem Ring
On LAN
On PME
Scan User Flash Area
Options Description
Disabled Enables or disables the BIOS power management
feature.
Enabled (default)
Off (default) Specifies the amount of time before the computer
enters standby mode.
1 Minute
2 Minutes
4 Minutes
6 Minutes
8 Minutes
12 Minutes
16 Minutes
Disabled Enables power management for hard disks during
standby and suspend modes.
Enabled (default)
Enables power management for video during standby
and suspend modes.
Enabled (default)
Options
Enabled (default)
Disabled
Stay Off
Last State (default)
Power On
Stay Off
Power On (default)
Stay Off
Power On (default)
Stay Off
Power On (default)
Enabled
Disabled (default)
B I O S s e t u p a n d m e n u s
Description
Enables the computer to boot without running
certain POST tests.
Specifies how the computer responds following a
power failure.
Stay Off; power off until power button pressed.
Last State; power state before a power failure.
Power On; power without restoring previous
power state.
How the computer responds to an incoming call
on an installed modem when the power is off.
How the computer responds to a LAN wakeup
event when the power is off.
How the computer responds to a PCI power
management enable event when the power is off.
Enables the BIOS to scan the flash memory for
user binary files that are executed at boot time.
FT1200 HANDBOOK 6/11