Table of Contents
Advertisement
Configuration Menu
SCSI Disk Utilities
When selected, this brings up the SCSI Disk Utilities Menu.
NOTE
In the utility, an asterisk (*) indicates the default setting for a field.
Host Adapter SCSI ID
Specifies the SCSI ID of the host adapter. The options are ID 0–15.
The default is ID 7.
SCSI Parity Checking
Enables or disables parity checking. When enabled, the host adapter
checks parity when reading from the SCSI bus to verify the correct
transmission of data from the SCSI devices. Select disabled if any
SCSI devices attached to the chain do not support SCSI parity.
The options are:
♦
Enabled (default)
Host Adapter SCSI Termination
Enables or disables SCSI termination on the motherboard.
The options are:
♦
Enabled (default)
Boot Device Options
This brings up the Boot Device Configuration Menu.
SCSI Device Configuration
This brings up the SCSI Device Configuration Menu.
Advanced Configuration Options
This brings up the Advanced Configuration Options Menu.
♦
Disabled
♦
Disabled
FT1200 HANDBOOK
S C S I d r i v e s
4/9
Advertisement
Table of Contents
