M o t h e r b o a r d : f e a t u r e s & u p g r a d e s
5/12
FT1200 HANDBOOK
2.
Turn off the computer, disconnect the computer's
power cord, and disconnect all external peripherals.
NOTE
The second processor must be identical in speed and voltage to the
first processor. The second processor also must be the same stepping
as, or no more than one stepping higher than, the first processor.
3.
Remove any peripherals that block access to the
application processor Slot 1 connector.
B
D
E
J3F2
Installing a Second Processor
4.
If a termination card is installed in the application
processor Slot 1 connector, remove it. See "How to
Remove The Termination Card".
5.
Remove the processor from its antistatic package.
6.
Orient the processor (B) so that the heatsink faces the
back of the motherboard. Slide the processor into the
A
D
C
OM06311