Table of Contents
Advertisement
B I O S s e t u p a n d m e n u s
Jumper Settings for Setup Program Modes
Mode
Jumper
Normal
1-2
Configure
2-3
Recovery
None
Setup Menus
Setup Menu Bar
Setup Menu Screen
Maintenance
Main
Advanced
Security
Power
Boot
Exit
Setup Function Keys
Setup Key
<F1> or <Alt-H>
<Esc>
<←> or <→>
<↑> or <↓>
<Home> or <End>
<PgUp> or <PgDn>
<F5> or <->
<F6> or <+> or <Space>
<F9>
<F10>
<Enter>
<+> or <->
6/4
FT1200 HANDBOOK
Description
BIOS uses current configuration and passwords for booting.
After the POST runs, Setup starts and displays the Maintenance menu.
There are options for setting the processor speed and clearing passwords.
BIOS recovers data from a recovery diskette. Refer to Chapter 5 for
information on recovering the BIOS data during an upgrade.
To enter the Setup program, turn the computer on and press <F2>
when you see the message:
Press <F2> Key if you want to run SETUP
Use this menu to:
Specify the processor speed and clear the Setup passwords.
This menu is only available in configure mode.
Allocate resources for hardware components.
Specify advanced features available through the chipset.
Specify passwords and security features.
Specify power management features.
Specify boot options and power supply controls.
Save or discard changes to the Setup program options.
Description
Brings up a help screen for the current item.
Exits the menu.
Selects a different menu screen.
Moves cursor up or down.
Moves cursor to top or bottom of the window.
Moves cursor to top or bottom of the window.
Selects the previous value for a field.
Selects the next value for a field.
Loads the default configuration values for the current menu.
Saves the current values and exits Setup.
Executes command or selects the submenu.
Moves a device or class of devices up or down in the boot order.
Advertisement
Table of Contents
