Decimal
Set I]
Set 1
Set 2
Set 3
Set 4
v(llU9
Stmdurd
9825
French/Geruan Scandinavim Spanishl Latin
ASCII
Set
Aneri can
35
#
#
.€
39
'
91
[
92
\
93
1
94
"
95
96
'
123
{
124
I
125
}
126
"
The Designate Standard Character Set
Instruction, CS
DESCFHPTIUN The designate standard character set instruction, CS,
provides the means of designating one of the five character sets (0
through 4) as the standard character set.
USES The instruction can be used to change the standard character
set to one with characters appropriate for your application. It is espe
cially useful when labels are in a language other than English.
SYNTAX CS character set number (terminator)
EXPLANAHONThe character set number can be 0 through 4. The set
designated by the CS instruction is used for all labeling operations
when the standard set is selected by the SS instruction or by the control
character shift-in (decimal equivalent 15) in a label string. Character
set 0 is automatically designated as the standard character set when
ever the plotter is initialized or set to default values.
A CS command executed while the standard set is selected will imme
diately change the character set used for labeling. CS commands
LABELING 5-3