HP 7470A Interfacing And Programming Manual page 94

settings. In example 6, the SR; command is the same as SR.75,1.5.
Since the parameters are positive, there is no mirroring. In example 7,
the negative width parameter causes mirroring right—to-left. In example
8, the negative height parameter causes mirroring top—t0-bottom.
@ /
P2
U11. 0: SR
G)
E .I .8? .-H8 :0 J15]
P1
'/ n1I'o=as'Aa'-1'5
In the next three illustrations, P1 and P2 have been changed so P1 is
lower right and P2 is upper left. Hence (P2x—Plx) is negative and
anything with a positive SR width parameter is mirrored right-to-left,
e.g., illustrations 9 and 11. The effect of the negative width parameter
in illustration 10 is cancelled by the negative difference (P2X- Plx).
(:)Aaa=0.1Iu
P2
DI1.0:SR-.7S.1.§
@ P1
\
s't-'sL'as=0'IfE
In the next illustrations, P1 and P2 have both been flipped so P1 is
upper right and P2 is lower left. Now any positive parameter causes
5-24 LABELING