ELECTRICAL SPECIFICATIONS
POWER REQUIREMENTS
HP C2858A and C2859A DesignJet 650C plotters have self-adjusting power supplies and do
not require voltage selector or switch settings prior to use. Table 2-1 lists the power require-
ments for the plotters.
Voltage Requirements
Frequency
Consumption
LINE CORD SET
The ac power outlet (mains) must have a protective
W A R N I N G
earth (ground) terminal. Serious shock hazard leading
to death or injury may result if the plotter is not prop
erly grounded.
The configuration of the ac line cord set required for use with the plotters is determined by the
country of destination for the plotters. Refer to Chapter 3 for a listing of the available ac line
cord connectors.
Site Planning and Requirements
2-2
Table 2-1. Power Requirements
Voltage
100 Vac
120 Vac
220 Vac
240 Vac
47-53 Hz and 57-63 Hz
140 Watts maximum
Source
Current (max)
1.4 A
1.2 A
650 mA
600 mA