Configuring The Sony Xg-80 Video Codec - Revolabs Fusion Setup Manual

Configuring the Sony XG-80 Video Codec

C
ONFIGURI NG THE A UDIO MENUS OF THE
1. Push the TOOLS button on the remote control
2. Select SETUP
3. Select AUDIO 1
4. Select AUDIO INPUT as MIC
5. Verify that Mic (A1/A3) has a checkmark
6. Turn ECHO CANCELLER to OFF
7. Verify INPUT as MONAURAL
8. Increase Sony volume level on remote to maximum
NOTE: You must use your Fusion remote control to control the room volume
for both the audio and video conference calls. Adjusting the volume in the
video codec will cause echo.
XG-80
VIDEO CODEC