Installing The Scanner Driver And Application - Fujitsu FI-4860C2 Installation Manual

2.3 Installing the Scanner Driver and
Application
For scanning documents with this scanner, both scanner driver and image capturing application
software (called "application" hereafter) must be installed on your PC.
Two types of scanner drivers and application are provided for this product.
Scanner Drivers
•
- FUJITSU TAIN32 Scanner Driver
- FUJITSU ISIS Scanner Driver
Application
•
- ScandAll 21 (for the FUJITSU TWAIN32 Scanner Driver)
- QuickScan Pro
For FUJITSU TWAIN32 Scanner Driver
■ Preparation
Confirm the following items before starting to install the application.
Prepare the Setup CD-ROM at hand. (Do not insert the Setup CD-ROM into the CD
•
drive yet.)
Confirm that the scanner is correctly connected to your PC.
•
HINT
Uninstall any older versions of the FUJITSU TWAIN 32 driver if it has already been
•
installed.
ATTENTION
There are two types of FUJITSU TWAIN 32:
•
One of the following driver software will be automatically installed according to your
Operating System (OS).
TM
(for the FUJITSU ISIS Scanner Driver)
For details on how to connect the scanner, refer to "2.2 Connecting the
Scanner" on page 13.
Uninstall [Scanner Utility for Microsoft Windows] from [Add/Remove Pro-
grams] on the control panel.

2.3 Installing the Scanner Driver and Application

2
17