Fujitsu FI-4860C2 Installation Manual page 16

Before moving the scanner, disconnect the power plug from the power
outlet.
Do not move the scanner with the power and interface cables connected
as this might damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the
power outlet, and disconnect data cables. Also, make sure that the floor is
free of obstructions.
Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other sources of
interference. Also, protect the scanner from static electricity as this might
cause the scanner to malfunction.
Do not use aerosol sprays near the scanner.
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt
and dust to enter the scanner, resulting in scanner failure and malfunction.
Avoid any contact when scanner is in use.
Avoid touching any part of the scanner mechanism or paper when the
scanner is operating as this may cause injuries.
●xiv