Fujitsu FI-4860C2 Installation Manual page 37

Image scanner

Hide thumbs Also See for FI-4860C2:

Table of Contents

Product/ASC-29160&filekey=u160_winxp_drv_rc1.exe

For other OS, refer to the following ADAPTEC address to get the neces-

sary update files and revises the driver.

HINT

For ASC29160

http://www.adaptec.com/worldwide/support/

drivers_by_product.html?sess=no

&cat=/Product/ASC-29160

For ASC39160

http://www.adaptec.com/worldwide/support/

drivers_by_product.html?sess=no

&cat=/Product/ASC-39160

When connecting the SCSI interface cable, be sure to first connect the

SCSI interface cable then turn on the power of the scanner and the PC.

ATTENTION

Connect the scanner so that it is the last device on the SCSI daisy chain.

ATTENTION

The SCSI card and SCSI interface cable need to be purchased separately.

ATTENTION

If the file address at ADAPTEC is changed, go to the ADAPTEC site

(http://www.adaptec.com/worldwide/homepage.html) and go to [Support]-

HINT

[Downloads] to get the necessary files and update information.

2.2 Connecting the Scanner

Table of Contents