Fujitsu FI-4860C2 Installation Manual page 14

Turn the scanner OFF if it is damaged.
If the scanner is damaged for any reason, turn off the scanner and unplug
the power cable before contacting the store where you purchased the
scanner.
Do not put liquids inside the scanner.
Do not insert or drop metal objects in to the scanner. Do not scan wet
documents or document with paper clips or staples. Do not splash or allow
the scanner to get wet.
If foreign objects (water, small metal objects, liquids, etc.) get inside the
scanner, immediately turn off the scanner and disconnect the power plug
from the power outlet, then contact the store where you bought the scan-
ner or the Maintenance Service Center. Pay particular attention to this
warning in households where there are small children.
Do not touch the inside of the scanner unless necessary.
Do not take apart or modify the scanner. The inside of the scanner
contains high-voltage components. Touching these components might
cause fire or electric shock.
●xii