Installing Fujitsu Isis Scanner Driver - Fujitsu fi-5000N Operator's Manual

4.3

Installing FUJITSU ISIS Scanner Driver

■ Preparation
Before starting the installation, prepare the Setup CD-ROM
ATTENTION
■ Installing
HINT
1. Turn on the power of the PC, and log on to Windows.
ATTENTION
2. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
ATTENTION
•
Although the scanner is bundled with its own scanner driver, to connect
the scanner to this product, you must use the scanner driver bundled with
this product.
•
We recommend you to check our website for the latest version of this
driver.
Our site is:
http://www.fujitsu.com/global/support/computing/peripheral/scanners
Windows XP screenshots are used in this section as examples. The
windows and operations may slightly vary depending on your OS.
When using Windows 2000 or Windows XP, log on as a user with
"Administrator" rights.
This screen may not appear when the "Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this CD-ROM directly from the "Explorer" or
"My Computer".

4.3 Installing FUJITSU ISIS Scanner Driver

fi-5000N Operator's Guide
4
33