Connecting The Scanner - Fujitsu FI-4860C2 Installation Manual

2.2 Connecting the Scanner

■ Connecting the power cable
Connect the power cable to the power inlet of the device and to a outlet rated to comply with
scanner power requirements.
■ Connecting the interface cable
An interface cable and a SCSI card are required.
Use the following SCSI card to connect to PC.
Recommended SCSI card
ADAPTEC SCSI card 29160
ADAPTEC SCSI card 39160
KOFAX Adrenaline 650i
Use of other SCSI card may cause unstable scan operations.
If you use ADAPTEC SCSI card 29160/39160, make sure you install the proper drivers and
updates as described below:
Recommended interface cable
ADAPTEC ACK-LVD-CBL KIT
ADAPTEC ACK-68V-68HD-LVD
ADAPTEC ACK-68V-68HD-LVD-2M-ICE
ADAPTEC ACK-LVD-CBL KIT
2.2 Connecting the Scanner
2
13