11 - 42 Symbol LS9208/LS9208i Product Reference Guide
Interleaved 2 of 5 (ITF)
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5
length from the following pages.
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
NOTE When setting lengths for different bar code types, include a leading zero for single digit numbers.
One Discrete Length - Select this option to decode only I 2 of 5 symbols containing a selected length. Select the
length using the numeric bar codes in
symbols with 14 characters, scan I 2 of 5 - One Discrete Length, then scan 1 followed by 4. To correct an error or
to change your selection, scan Cancel on
Enable Interleaved 2 of 5
*
Disable Interleaved 2 of 5
Appendix D, Numeric Bar
page D-4.
I 2 of 5 - One Discrete Length
Codes. For example, to decode only I 2 of 5