Lexmark X746de Service Manual page 475

Attach the other end of the spring onto the link.
7.
Note: Depending on the orientation of the spring, the spring will attach from either the inside or outside.
Replacing the left spring
Open the top access cover.
1.
With a spring hook, detach the spring from the left link.
2.
Note: Depending on the orientation of the spring, the spring will attach from the inside or the outside.
Pull the pivot upward to unlatch it from the frame then slide the pivot out of the frame and outer top access
3.
cover holes.
Note: Do not remove the pivot from the inner hole
Slide out and remove the spring from the pivot.
4.
7526
Repair information
4-181
Previous
Next
Go Back