Lexmark X746de Service Manual page 418

Hide thumbs Also See for X746de:

Table of Contents

Installation notes:

When installing the new LVPS, make sure the voltage switch (A) is set for the proper value (115 V or

230 V), depending on the country.

Install the LVPS, and make sure the fuser AC cable is in the cable guides, and not behind the LVPS.

Reconnect the fuser AC cable to the LVPS.

Replace the five LVPS mounting screws.

Reconnect the cable in connector JLVPS1 on the system board.

Service Manual

X748dteX748de