Lexmark X746de Service Manual page 392

7526
Connect the cartridge 2/cartridge 3 motor cable (two connectors) (N), and make sure the cable is in the
10.
cable clamps (O).
O
Hold the motor driver card in place and reinstall the two screws (P) to secure the motor driver card.
11.
Connect the three connectors (Q), and secure the cables in the cable clamps (R).
12.
Q
Reinstall the low-voltage power supply (LVPS).
13.
Replace the right and rear covers.
14.
Replace the transport belt module and developer units.
15.
Replace the cartridges and the fuser.
16.
Service Manual
4-98
N
P R
O
R
Previous
Next
Go Back