Lexmark X746de Service Manual page 265

202 paper jam
If the paper is visible in the standard exit bin, then grasp the paper and pull it away from the bin.
Paper jam under the fuser
Open the upper front door, and then open the lower front door.
1.
Warning: Potential Damage—To avoid overexposing the photoconductors, do not leave the front doors
open for more than 10 minutes.
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
Grasp the paper on each side and pull it forward.
2.
Close the lower front door, and then close the upper front door.
3.
Touch Continue.
4.
Paper jam behind the fuser
Open the upper front door, and then open the lower front door.
1.
Warning: Potential Damage—To avoid overexposing the photoconductors, do not leave the front doors
open for more than 10 minutes.
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
7526
Previous
Go Back
Diagnostic aids
3-63
Next