Lexmark X746de Service Manual page 435

Lower the paper pick mechanism, and remove through the front of the printer.
14.
Note: Make sure the JTRAY1 and JTRAY2 connectors do not bind when passing through the frame
access hole.
Installation notes:
Remove the waste toner assembly. See
1.
Replace the rear frame cover to protect the system board.
2.
Slide the scanner lock to the forward position to lock the flatbed CCD carrier module in the home position.
3.
"Waste toner assembly removal" on page
7526
4-200.
Repair information
4-141
Previous
Next
Go Back