Menu - Kawai MP8 Owner's Manual

6. MENU
Zone parameters (Int)
Mode
Sound Selection
Damper Effect (Int Piano only)
String Resonance (Int Piano only)
Voicing (Int Piano only)
Key Range Hi/Lo
Velocity Switch On/Off
Velocity Switch Value
Velocity Compression
Velocity Offset
Zone Transpose
Volume
Pan
Fine Tune
Damper Pedal On/Off/Hold
Footswitch On/Off
Expression Pedal On/Off
Modulation On/Off
Bender On/Off
Bender Range
Solo On/Off
Solo Mode
The MENU buttons allow access to the edit parameters in the MP8. This
collection of settings together with other editable parameters can be stored
as a SETUP. The MP8 provides 256 SETUPs, and all are user programmable.
A SETUP consists of four zones. Each zone can be set as Internal, External
or Both individually. Inside each of the four zones, a multitude of features
and effects can be programmed and combined together into one exciting
SETUP.
A total of 256 SETUPs may be programmed in this way.
The menu consists of Internal parameters, External parameters and Common
parameters.
Common parameter affects to all zones. If a zone is set as Both, both the
Interna] parameters and External parameters are available for the zone.
Use the MENU buttons to scroll through all the different parameters.
Zone parameters (Ext Common parameters
Mode Master Volume
TX Channel Expression Pedal CC#
TX PRG # On/Off Footswitch CC#
PRG # Temperament
TX Bank On/Off Stretch Tuning
Bank Select MSB LSB
Key Range Hi/Lo
Velocity Switch On/Off
Velocity Switch Value
Velocity Compression
Velocity Offset
Zone Transpose
TX Volume On/Off
Volume
TX Controller On/Off
Pan
Fine Tune
Damper Pedal On/Off
Footswitch On/Off
Expression Pedal On/Off
Modulation On/Off
Bender On/Off
TX Bender Range On/Off
Bender Range
Solo On/Off
Solo Mode
Caution:
The edited settings will be erased when the paver is turned off, or other
sound is recalled. To save these settings, use the STORE procedure to
save them as a SETUP (see p.XX)