Selecting A Setup - Kawai MP8 Owner's Manual

UPPER SECOND THIRD PROG#:MSB-LSB
1 A 001:000-000
1 B 002:000-000
1 C 003:000-000
1 D 004:000-000
1 2 A~D 005:000-000 ~ 008:000-000
3 A-D 009:000-000 ~ 012:000-000
4 A-D 013:000-000 ~ 016:000-000
1 5 A-D 017:000-000 ~ 020:000-000
6 A~D 021:000-000 ~ 024:000-000
l 7 A~D 025:000-000 ~ 028:000-000
8 A-D 029:000-000 ~ 032:000-000
2 1~8 A~D 033:000-000 ~ 064:000-000
3 1~8 A~D 065:000-000 ~ 096:000-000
4 1~8 A-D 097:000-000 -- 128:000-000
5 1-8 A-D 001:000-001 ~ 032:000-001
6 1~8 A-D 033:000-001 ~ 064:000-001
7 1-8 A-D 065:000-001 ~ 096:000-001
8 1~8 A-D 097:000-001 -- 128:000-001
The transmitted program number is shown in the display
You can also send program change numbers by using VALUE buttons.
Note:
Full program change numbers including bank numbers can be
transmitted by setting them in MENU and saving it as a SETUP. See
page 31 for details.
2.9 Selecting a SETUP
The MP8 offers 256 preset combinations of the panel settings called SETUPs.
To select a SETUP, press the SETUP button. Now the SOUND SELECT
buttons are used to select a SETUP Use a combination of the numbers in
the upper, second and third rows to select a desired SETUP The display
will show the selected SETUP name.
To check the sound (internal) or program number (external) assigned to each
zone, press the ZONE SELECT button. The display briefly shows the
assigned sound name or program number, and then automatically returns to
the SETUP name in a few seconds.
If you hold a ZONE SELECT button for 2 seconds the display will show
you the key range information for that zone. You can also set the key range
using the same procedure that is used in Sound mode.