Job Priority Operation Settings; Preview Settings; Original Direction Confirmation Screen; Realtime Preview - Develop ineo+ 224 Instructions For Use Manual

7

[Job Priority Operation Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Job Priority Operation Settings]
Specify the printing priority order and whether to skip a job when you cannot perform a printing job immedi-
ately.
Settings
[Fax RX Job Priority]
[Skip Job (Fax)]
[Skip Job (Copy, Print)]

[Preview Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Preview Settings]
Specify the preview function settings, such as the display mode of preview images that appear when Preview
is pressed on the Control Panel.
Settings
[Original Direction Confir-
mation Screen]

[Realtime Preview]

[Preview Display Condi-
tions (Standard Applica-
tion)]
[Preview Display Condi-
tions (Registered Applica-
tion)]

[Original Direction Confirmation Screen]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Preview Settings] - [Original Direction Con-
firmation Screen]
Select whether or not to display the screen to select the direction in which the original is loaded after pressing
Preview.
[ON] is specified by default.
[Realtime Preview]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Preview Settings] - [Realtime Preview]
Select whether or not to display a preview image for each page when scanning an original in Scan/Fax mode.
Each preview image shows the scanned original as is.
[OFF] is specified by default.
7-12
Description
Select whether to give priority to the printing of a fax if it is received during
copying or printing.
[No] is specified by default.
Select whether or not to handle the subsequent job as long as it is a print-
ing job for the received fax when printing has stopped because, for exam-
ple, there is no paper.
[Yes] is specified by default.
Select whether or not to handle the subsequent job as long as it is not a
printing job for the received fax when printing has stopped because, for ex-
ample, there is no paper.
[Yes] is specified by default.
Description
Select whether or not to display the screen to select the direction in which
the original is loaded after pressing Preview.
For details, refer to page 7-12.
Select whether or not to display a preview image for each page when scan-
ning an original in Scan/Fax mode.
For details, refer to page 7-12.
Select the conditions for displaying preview images.
For details, refer to page 7-13.
Select conditions to display preview images when using an OpenAPI ap-
plication.
For details, refer to page 7-13.
ineo+ 224/284/364/454/554