Internet Fax Self Rx Ability; Internet Fax Advanced Settings - Develop ineo+ 224 Instructions For Use Manual

7

[Internet Fax Self RX Ability]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Network Fax Settings] - [Internet Fax Self RX
Ability]
This machine notifies its reception capability when returning a MDN message if you are using the Internet Fax
function. Change the reception capability of this machine which is notified upon returning a MDN message
as necessary.
Settings
[Compression Type]
[Paper Size]
[Resolution]

[Internet Fax Advanced Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Network Fax Settings] - [Internet Fax Advanced
Settings]
Configure settings for fax reception confirmation (MDN/DSN) to be sent by this machine if you are using the
Internet fax function.
Settings
[MDN Request]
[DSN Request]
[MDN Response]
[MDN/DSN Response
Monitoring Time]
[Maximum Resolution]
[Add Content-Type Infor-
mation]
7-32
Description
Change the compression type of a fax job the machine can receive.
Change the paper size for a fax job the machine can receive.
Change the resolution of a fax job the machine can receive.
Description
Select whether to request for fax reception result (MDN request) to the des-
tination.
If a MDN request is sent, the recipient machine returns a response mes-
sage when a fax is received, so that you can check that the fax is success-
fully received by the destination.
Also, by receiving a response message from the destination, you can ob-
tain the reception capability information of the destination. When new re-
sponse message is received from a destination registered in the address
book, the capability information is overwritten with new one.
[Yes] is specified by default.
Select whether to request for fax reception result (DSN request) to the des-
tination mail server.
If you select [Yes] for [MDN Request], priority is given to the MDN request.
[Do Not Send] is specified by default.
Select whether to return a response message when a sender requests for
fax reception result (MDN request) to this machine.
[Yes] is specified by default.
If necessary, change the waiting time for a response from the destination
after a MDN request or DSN request is sent by this machine.
If a response message is received after the specified wait period has
elapsed, the machine ignores the message.
[24 hours] is specified by default.
If necessary, switch the maximum resolution that this machine can sup-
port.
[Ultra Fine] is specified by default.
Specify whether to add Content-Type information to an Internet fax when
sending it.
If [Yes] is selected, "application=faxbw" is added to the Content-Type
header of MIME as a sub type.
[Do Not Send] is specified by default.
ineo+ 224/284/364/454/554