Binding Position; Original Direction - Develop ineo+ 224 Instructions For Use Manual

5

[Binding Position]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings] - [Binding Position]
When scanning a 2-sided original, select the original binding position to prevent the binding positions being
reversed between the front and rear faces.
Settings
[Auto]
[Left Bind]
[Top Bind]

[Original Direction]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Original Settings] - [Original Direction]
Specify the orientation of the loaded original.
5-20
Description
The binding position is automatically set. A page binding posi-tion along
the long side of the paper is selected if the original length is 11-11/16 inch-
es (297 mm) or less. A page binding along the short side of the paper is se-
lected if the original length exceeds 11-11/16 inches (297 mm).
Select this option when the binding position is set to the left of the original.
Select this option when the binding position is set to the top of the original.
ineo+ 224/284/364/454/554