Develop ineo+ 224 Instructions For Use Manual page 47

2.3 How To Send A Fax
4
Configure the option settings for fax transmission as necessary.
% For details on configuring option settings, refer to the respective columns of the following table.
Purpose
To configure basic options such as color and original size
To configure options to scan various types of originals such as various sizes
and books
To adjust the image quality level of the original such as colored background
(newspaper, etc.) or light printing original
To print date/time and page number
Other option settings
5
Press the Start key.
% Tap [Check Setting] before sending, and check the destination and settings as necessary.
% To redo operations for specifying destinations or option settings, press Reset.
Transmission begins.
% If you press the Stop key while scanning an original, the scanning stops, and a list of stopped jobs
appears. To cancel scanning of the original, delete the job from the list of inactive jobs.
Tips
- When an Internet fax is sent, the TX result report is printed. With the TX result report, you can check for
successful fax transmission.
- When the recipient machine receives an Internet fax, an MDN message that provides notification of suc-
cessful reception is printed on this machine. You can check whether the fax has been successfully re-
ceived by reading the MDN message.
Related setting
- You can change the default options for scan transmission to suit your environment. For details, refer to
page 6-14.
ineo+ 224/284/364/454/554
2
Reference
page 1-19
page 1-21
page 1-25
page 1-26
page 1-28
2-9