Skipping Blank Pages ([Blank; Splitting The Left And Right Pages Of A Book And Catalog ([Book Original]); Scanning A Number Of Originals In Several Batches ([Separate Scan]) - Develop ineo+ 224 Instructions For Use Manual

1.4 Option settings for fax transmission
Skipping blank pages ([Blank Page Removal])
Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.
For details, refer to page 5-16.

Splitting the left and right pages of a book and catalog ([Book Original])

You can scan two-page spreads such as books and catalogs separately into the left and right pages, or scan
them as one page. If you place a book or catalog on the Original Glass, you do not need to close the ADF
to scan it.
For details, refer to page 5-21.

Scanning a number of originals in several batches ([Separate Scan])

If the number of original sheets is so large that they cannot be loaded into the ADF at the same time, you can
load them in several batches and handle them as one job.
In [Separate Scan], you can switch between ADF and Original Glass to scan the originals.
ineo+ 224/284/364/454/554
1
1-23