Installing The Soft Top - Jeep Wrangler Owner's Manual

NOTE:
To aid in disconnecting the knuckles, you
may carefully tap on the knuckles using a
rubber mallet.
5. Unzip the zipper on the sport bar cover to
expose the pivot brackets. Remove the brack-
ets using a #T30 Torx head driver. Recover
and re-zip the sports bar cover. Store the pivot
brackets and screws in a safe place.
6. Reinstall the hard top. Refer to "Freedom
Top Three-Piece Modular Hard Top — Front/
Rear Panel Installation" in this section.

Installing the Soft Top

NOTE:
The following procedures are for first time
set up only. For future soft top procedures,
refer to "Soft Top" in this section.
1. Locate and remove the following items prior
to hard top removal:
• Right and left door frames
• Door frame attachment knobs (four for two-
door models, six for four-door models)
• Right and left quarter windows
• Rear window
2. Remove the hard top. Refer to "Freedom Top
Three-Piece Modular Hard Top — Front/Rear
Panel Removal" in this section.
3. Install the door frames. Refer to "Door
Frame" in this section.
95