Jeep Wrangler Owner's Manual page 113

NOTE:
Clean side and rear windows before removal
to assist in preventing scratching during
removal of the soft top. If zippers are difficult
to operate due to road dust, etc., clean them
with a mild soap solution and a small brush.
Cleaning products are available through
your authorized dealer.
1. If your vehicle has half doors, remove each
half-door window by opening the door and
lifting the half-door window out.
NOTE:
Stow the half-door windows carefully out-
side of the vehicle, never inside, to avoid
scratches.
2. Unclip and move the sun visors to the side.
3. Release the header latches and leave the
hooks in the loops on the windshield.
4. Open the swing gate.
5. Before unzipping the rear window, release the
first 3 in (7.6 cm) of both sail panels from the
channel. Remove the swing gate bar by pulling it
straight rearward out of the swing gate brackets.
• Unzip the rear window starting at the right
lower corner of the window. Pull the zip-
per up, across the top and down to the left
lower corner. Zipper pulls will stay on
the rear window. Pull down on the rear
window to disengage it from the zipper on
the top cover.
111