Compass Display / Eco (Fuel Saver Mode) - If Equipped - Jeep Wrangler Owner's Manual

drivable distance of the vehicle, regardless
of the DTE displayed value.
When the DTE value is less than 30 miles
(48 km) estimated driving distance, the DTE
display will change to a text display of LOW
FUEL. This display will continue until the ve-
hicle runs out of fuel. Adding a significant
amount of fuel to the vehicle will turn off the
LOW FUEL text and a new DTE value will
display.
• Elapsed Time
Shows the total elapsed time of travel since the
last reset when the ignition switch is in the ACC
position. Elapsed time will increment when the
ignition switch is in the ON or START position.
• Display Units of Measure in:
To make your selection, press and release the
FUNCTION SELECT button until "ENGLISH" or
"METRIC" appears.
To Reset The Display
Reset will only occur while a resettable function
is being displayed. Press and release the
FUNCTION SELECT button once to clear the
resettable function being displayed. To reset all
resettable functions, press and release the
FUNCTION SELECT button a second time
within three seconds of resetting the currently
displayed function (reset ALL will display dur-
ing this three-second window).
Compass Display / ECO (Fuel Saver
Mode) — If Equipped
The compass readings indicate the direction
the vehicle is facing. Press and release the
COMPASS button to display one of eight com-
pass readings and the outside temperature.
NOTE:
The system will display the last known out-
side temperature when starting the vehicle
and may need to be driven several minutes
before the updated temperature is dis-
played. Engine temperature can also affect
the displayed temperature, therefore tem-
perature readings are not updated when the
vehicle is not moving.
ECO (Fuel Saver Mode) — If Equipped
The ECO message will display below the out-
side temperature in the EVIC display. This
message will appear whenever you are driving
in a fuel efficient manner.
This feature allows you to monitor when you are
driving in a fuel efficient manner, and it can be
used to modify driving habits in order to in-
crease fuel economy.
Automatic Compass Calibration
This compass is self-calibrating, which elimi-
nates the need to set the compass manually.
When the vehicle is new, the compass may
appear erratic and the EVIC will display "CAL"
until the compass is calibrated. You may also
calibrate the compass by completing one or
more 360–degree turns (in an area free from
large metal or metallic objects) until the "CAL"
message displayed in the EVIC turns off. The
compass will now function normally.
NOTE:
A good calibration requires a level surface
and an environment free from large metallic
objects such as buildings, bridges, under-
ground cables, railroad tracks, etc.
161