Jeep Wrangler Owner's Manual page 168

Temperature Control
Rotate this control to
regulate the tempera-
ture of the air inside the
passenger
ment. Rotating the dial
left into the blue area of
the scale
cooler
while rotating right into
the red area indicates
warmer temperatures.
NOTE:
If your air conditioning performance seems
lower than expected, check the front of the
A/C condenser located in front of the radia-
tor for an accumulation of dirt or insects.
Clean with a gentle water spray from behind
the radiator and through the condenser.
Fabric front fascia protectors may reduce
airflow to the condenser, reducing air con-
ditioning performance.
166
Mode Control (Air Direction)
compart-
indicates
temperatures
symbol, the more air distribution you receive
from that mode.
Panel
Air is directed through the outlets in the
instrument panel. These outlets can be
adjusted to direct airflow.
NOTE:
The center instrument panel outlets can be
aimed so that they are directed toward the
rear seat passengers for maximum airflow
to the rear.
Bi-Level
Rotate this control to
choose from several
patterns of air distribu-
NOTE:
tion. You can select ei-
ther a primary mode as
For all settings except full cold or full hot,
identified by the sym-
there is a difference in temperature between
bols on the control, or a
the upper and lower outlets. The warmer air
blend of two of these
flows to the floor outlets. This feature gives
modes. The closer the
improved comfort during sunny but cool
setting is to a particular
conditions.
Floor
Mix
windshield. This setting is good for maintaining
comfort while reducing moisture on the wind-
shield.
Air is directed through the panel and
floor outlets.
Air is directed through the floor outlets
with a small amount flowing through the
defrost and side window demist outlets.
Air is directed through the floor, defrost,
and side window demist outlets. This
setting works best in cold or snowy
conditions that require extra heat to the