Second-Row Passenger Seats - Chrysler Journey User Manual

trols for each heater are located in the switch
bank in the center of the instrument panel.
After turning ON the ignition, you can choose
from High, Low, or Off heat settings. Amber
indicator lights in each switch indicate the level
of heat in use. Two indicator lights will illuminate
for high, one for low, and none for off.
Press the switch once to select
High-level heating.
switch a second time to select
Low-level heating.
switch a third time to shut the heat-
ing elements Off.
If High-level heating is selected, the system
automatically switches to Low-level heating
and turns one indicator light off after approxi-
mately 30 minutes of continuous operation. It
will turn the heater and the remaining indicator
light off after an additional 30 minutes of con-
tinuous operation. If Low-level heating is se-
lected, the system automatically turns the
heater and the indicator light off after approxi-
mately 30 minutes of continuous operation.
86
NOTE:
Once a heat setting is selected, heat will be
felt within two to five minutes.
WARNING!
• Persons who are unable to feel pain to the
skin because of advanced age, chronic
illness, diabetes, spinal cord injury, medi-
cation, alcohol use, exhaustion or other
Press the
physical condition must exercise care when
Press the
using the seat heater. It may cause burns
even at low temperatures, especially if
used for long periods of time.
• Do not place anything on the seat that
insulates against heat, such as a blanket or
cushion. This may cause the seat heater to
overheat. Sitting in a seat that has been
overheated could cause serious burns due
to the increased surface temperature of the
seat.
CAUTION!
Repeated overheating of the seat could dam-
age the heating element and/or degrade the
material of the seat.

Second-Row Passenger Seats

To provide additional storage area, each
second-row passenger seat can be folded flat.
This allows for extended cargo space and still
maintains some seating room if needed.
NOTE:
Prior to folding the second-row passenger
seat, make sure the front seatback is not in
a reclined position. This will allow the seat to
fold easily.