To Deactivate; To Resume Speed; To Activate - Chrysler Journey User Manual

Electronic Speed Control Lever
NOTE:
In order to ensure proper operation, the
Electronic Speed Control System has been
designed to shut down if multiple Speed
Control functions are operated simulta-
neously. If this occurs, the Electronic Speed
Control System can be reactivated by push-
ing the Electronic Speed Control ON/OFF
button and resetting the desired vehicle set
speed.

To Activate

Push and release the ON/OFF button located
on the end of the speed control lever. The
Cruise Indicator Light in the instrument cluster
will illuminate. To turn the system off, push and
release the ON/OFF button a second time. The
Cruise Indicator Light will turn off. Be sure to
turn the system off when it is not in use.
NOTE:
The Electronic Speed Control System will
automatically turn off when the engine is
turned OFF.
WARNING!
Leaving the Electronic Speed Control system
on when not in use is dangerous. You could
accidentally set the system or cause it to go
faster than you want. You could lose control
and have an accident. Always leave the sys-
tem off when you are not using it.
To Set a Desired Speed
When the vehicle reaches the speed desired,
press downward on the lever to SET DECEL
and release. Release the accelerator pedal and
the vehicle will operate at the selected speed.
NOTE:
• The vehicle must be traveling at least
25 mph (40 km/h) for the speed control to
set.
• The vehicle should be traveling at a
steady speed and on level ground before
pressing the lever to SET DECEL.

To Deactivate

A soft tap on the brake pedal, or pulling the
speed control lever toward you to CANCEL, or
normal brake pressure while slowing the ve-
hicle will deactivate the speed control without
erasing the set speed from memory. Pressing
the ON/OFF button or turning the ignition OFF
erases the set speed from memory.

To Resume Speed

If you deactivate the Electronic Speed Control
without erasing the set speed from memory
and your vehicle speed is above 20 mph
(32 km/h) you can resume the previous set
speed. To do so, push the lever upward to
RESUME ACCEL and release and then remove
your foot from the accelerator pedal.
99