Rear Window Features; Rear Window Wiper/Washer - Chrysler Journey User Manual

To install the cover, position it in the vehicle so
that the flat side of the housing faces upward.
Then, insert either the left or the right spring-
loaded post (located on the ends of the cover
housing) into the left attachment point or the
right attachment point (shown).
Installing Retractable Cargo Area Cover
Insert the spring-loaded post on the opposite
end of the cover housing into the attachment
point on the opposite side of the vehicle.
Grab the cover handle and pull it toward you.
As the cover nears the liftgate opening, guide
the rear attachment posts (on both ends of the
cover) into the notches in the trim panels.
112
Lower the cover to position the posts into the
bottom of the notches and release the handle.
Positioning Retractable Cargo Area Cover
WARNING!
A cargo cover that is unsecured in the vehicle
could cause injury in an accident. It could
become airborne during a sudden stop and
strike someone inside the vehicle. Do not
store the cargo cover on the cargo floor or in
the passenger compartment. Remove the
cover from the vehicle when taken from its
mounting. Do not store it in the vehicle.

REAR WINDOW FEATURES

Rear Window Wiper/Washer

The rear window wiper/washer control is lo-
cated on the right side of the steering column.
Rear Window Wiper/Washer Control
Rotate the switch upward to the "On"
position will activate the rear wiper.